2 HEATING LINE BENDING UNIT O-1302

2 HEATING LINE BENDING UNIT O-1302

This two element bender has a working surface of 130 cm (51″Inches) and the advantage of heating both sides of the material simultaneously. By heating both sides at the same time, precision bending times are greatly reduced and allow bending of thicker materials. The mechanical arm ensures uniform heating of the material. Compatible with most plastics and material thicknesses from 0.4 mm to 15mm (1/64 – 1/2”). The lower and upper heating elements are independently switched and have separate temperature controls to provide the best results. Our resistance wires offer the longest life available. The O-1302 Temperature and Timer Controls provide superior performance and eliminate discoloration, yellowing and distortion when bending colored and printed surfaces.

Description

This two element bender has a working surface of 130 cm (51″Inches) and the advantage of heating both sides of the material simultaneously. By heating both sides at the same time, precision bending times are greatly reduced and allow bending of thicker materials. The mechanical arm ensures uniform heating of the material. Compatible with most plastics and material thicknesses from 0.4 mm to 15mm (1/64 – 1/2”). The lower and upper heating elements are independently switched and have separate temperature controls to provide the best results. Our resistance wires offer the longest life available. The O-1302 Temperature and Timer Controls provide superior performance and eliminate discoloration, yellowing and distortion when bending colored and printed surfaces.

Features

  1. Water and scratch resistant surface
  2. End stop with measuring guide
  3. Lower and Upper heating elements (Two elements)
  4. Dual and Independent Temperature Controls
  5. Time controller
  6. Dual Height adjustments (both elements)
  7. Automatic Safety System – shuts off unit after 30 minutes
  8. Full 1 Year Warranty
Perfect for bending ABS, Acrylic (Plexiglas / PMMA), PC, PP, PVC, PS, PET and more
Do you want to make precise angles? Check out our Angle stop O-1300K

Additional information

working area length

51 1/4", 130 cm

working area width

2 x 11 3/4", 2 x 30 cm

machine size

58" x 28" x 4 1/4", 147x71x11cm

weight

60.85 lbs, 27.6kg

power consumption

700 W

fuse

10A, 6.3A

packaging size

59" x 29" x 6 1/4", 150x74x16cm

weight with packaging

69.45 lbs, 31.5kg